MRI ELECTRIC CENTER STAND

NDIzQjAwODQ5QzFGMjBGNDk5OTk6MzNjMzg0MDlmNGM0ZGU1MWVjNzM5NjFmNGRlYmQxNTg6Ojo6OjA=.jpg
NDIzQjAwODQ5QzFGMjBGNDk5OTk6OGFlMjAwOWM1NDEyMjBmNDQ0NGJjZTFmMTk1NzRiMjE6Ojo6OjA=.jpg
NDIzQjAwODQ5QzFGMjBGNDk5OTk6ZDc1YTg4NWE2Y2RkMmVmMTE5MjQ5MWFkYzk2ZDgxYjM6Ojo6OjA=.jpg
NDIzQjAwODQ5QzFGMjBGNDk5OTk6MzNjMzg0MDlmNGM0ZGU1MWVjNzM5NjFmNGRlYmQxNTg6Ojo6OjA=.jpg
NDIzQjAwODQ5QzFGMjBGNDk5OTk6OGFlMjAwOWM1NDEyMjBmNDQ0NGJjZTFmMTk1NzRiMjE6Ojo6OjA=.jpg
NDIzQjAwODQ5QzFGMjBGNDk5OTk6ZDc1YTg4NWE2Y2RkMmVmMTE5MjQ5MWFkYzk2ZDgxYjM6Ojo6OjA=.jpg

MRI ELECTRIC CENTER STAND

719.99

Leg Kit: (Call for available options) 

MRI ELECTRIC CENTER STAND - PLEASE READ ENTIRE DESCRIPTION
MRI ELECTRIC CENTER STANDS FIT HARLEY DAVIDSON® TOURING BIKES FROM 1990 TO PRESENT. THESE STANDS BOLT ON IN MINUTES AND USE A LINEAR ACTUATOR TO RAISE AND LOWER THE LEGS ELECTRONICALLY. AN AIR RIDE SYSTEM MUST BE USED TO LOWER THE BIKE/STAND TO THE GROUND. THE TWO LEGS PROVIDE A VERY STURDY BASE, ALLOWING THE BIKE TO SIT UPRIGHT WHILE PARKED. STANDS COME POWDER COATED BLACK, BUT COULD BE CHROMED OR PAINTED TO MATCH YOUR BIKE’S COLOR.
ALL MRI ELECTRIC CENTER STANDS HAVE BEEN REDESIGNED TO MAKE FITMENT FOR ALL CUSTOMERS A BREEZE. NO MORE MEASURING IS NEEDED!  PLEASE SELECT YOUR YEAR AND LEG KIT BASED ON YOUR BIKE'S CONFIGURATION.
MODELS OF FITMENT
A. 2006 AND EARLIER
B. 2007 AND 2008 - MODELS WITH LEGEND AIR RIDE: THE COMPRESSOR UNIT WILL NEED TO BE MOVED FROM UNDER THE BIKE AND RELOCATED
C. 2009 AND LATER - NOTE: DOES NOT WORK WITH CROSS UNDER EXHAUST,  MODELS WITH LEGENDS AIR RIDE INSTALLATION REQUIRES SEPARATE PURCHASE OF MRI PLUMBING AND LINE KIT.  
NOTE: MODELS WITH LEGENDS AIR RIDE: THE COMPRESSOR UNIT WILL NEED TO BE MOVED FROM UNDER THE BIKE AND RELOCATED.
LEG KITS (1-3.5 RECOMMENDED FOR DIRTY AIR FRONT+ REAR KITS, #1 RECOMMENDED FOR REAR AIR)
MRI CUSTOMS IS NOW OFFERING 4 DIFFERENT LEG KITS FOR PROPER FITMENT.  EACH LEG KIT CONTAINS ALL THE NECESSARY COMPONENTS NEEDED FOR AN EASY INSTALL, INCLUDING: (2 SETS*) OF 5/16” STEEL LEGS, (2) 5/16” STEEL FEET, (8) ¼” SHIMS MADE OF POLYCARBONATE MATERIAL (AKA, BULLET-PROOF GLASS) ON A CNC, A WIRING HARNESS, AND HARDWARE PACK.  PICTURES PROVIDED ABOVE.
KIT #1
MOST POPULAR LEG KIT.  ADJUSTABLE FROM 2 ¼ - 4 ½”, EVERY ¼”.  RECOMMENDED FOR BIKES WITH A 23”/26”/30” FRONT WHEEL, WITH REAR AIR RIDE ONLY.
KIT 1-3.5
ADJUSTABLE FROM 1 - 3 ½”, EVERY ¼”.  RECOMMENDED FOR BIKES WITH A 26” OR 30" FRONT WHEEL, WITH BOTH FRONT AND REAR AIR RIDE.

KIT 3/4   
ADJUSTABLE FROM 3 ½ - 5 ½”, EVERY ¼”.  RECOMMENDED FOR BIKES WITH A 21" AND UNDER FRONT WHEEL, WITH REAR AIR RIDE ONLY.

KIT NO HOLE*
"NEW" NO HOLE LEG AVAILABLE.  ADJUSTABLE FROM ¾” - 2”, EVERY ¼”. RECOMMENDED FOR LAY FRAME OR CLOSE TO LAY FRAME BIKES. *THIS KIT CONTAINS ONLY ONE SET OF LEGS.

Year:
Quantity:
Add To Cart